Remove and Replace Exposed Aggregate Concrete Driveway and Sidewalk 1. Remove existing 4” thick exposed aggregate concrete driveway and 3” thick exposed aggregate concrete front sidewalk. 2. Install approximately 1,600 square feet of 4” thick exposed aggregate concrete driveway and approximately 90 square feet of 3” thick exposed aggregate concrete 3-foot-wide sidewalk. Finish with “wet look” sealant. Industry standard sized wire mesh shall be used. Poly joint material shall be used, color to match concrete. 3. Install 4 feet of 12” RCP in road ditch (18” to 24” deep) to accommodate wider driveway. Remove 5 feet of existing 12” RCP so that the pipe length matches the driveway width. The removed pipe may be reused for widening. 4. Install brick-faced walls at each side of the driveway at the pipe ends. The walls shall extend 6” below the invert of the pipe. The exposed walls and top shall be brick-faced.

Repair concrete sidewalk damaged by tree roots

I would like to widen my aggregate driveway.

Replace gravel driveway and parking area

Driveway paving. Want good gravel foundation, well crowned concrete driveway with williamsburg style pebble aggragate. Must consider invisible fence at expansion joint.

Remove existing driveway and walk way and replace with concrete